Gummy bears made with weed

Gummy bears made with weed

How to Make Weed Gummies

Most everyone loves a sweet gummy treat, and when it’s filled up with THC goodness it’s even harder to turn down. These delicious bits of cannabis candy can be a pricey purchase at the local dispensary, so why not try making your own at home? There are a lot of recipes online that say they show you how to make cannabis gummy bears in the home kitchen but results can often be disappointing – Soft, jelly-like edibles that end up turning runny at room temperature or even melting out-right.

So what if you want to make cannabis gummies that have real store-bought quality? Turns out there’s a secret ingredient used by the pros in their weed gummy recipes that makes the difference between a snappy, chewy gummy and a soggy, weepy mess. It’s time to break out your chefs hat and arm yourself with your favorite whisk – We’re going to talk about the science of how to make cannabis infused gummies in your very own home.

What are weed gummies?

On the surface weed gummies look a lot like regular, non-THC gummy snacks, and the temptation can be to look up a regular gummy candy recipe and follow that, simply adding in a bit of concentrate as you go. To understand why that won’t work let’s discuss candy making for a moment.

Candy making is, at it’s most basic level, the act of taking sugar and cooking it until it melts; add nothing (or a bit of water) and the sugar turns into a brittle hard candy when it cools. Add gelatin and the sugar will set into a gelatinous or spongy form, resulting in gummies or marshmallows. Add an oil or fat, such as butter, and you get a chewy, soft caramel. And it’s right there where the problem comes in.

THC concentrate of any fashion is always an oil; even THCA diamonds and shatter, both of which are set and hardened, turn into an oil on applying heat. Once you add enough oil to your candy it will not set properly – Oil does not want to combine with the hard, crystalline candy structure, a process referred to as “emulsification”. Without proper emulsification you’ll get candy that’s runny, tacky to the touch, or weeps liquid.

Emulsification is Key

So how do they make the kind of stretchy, room temperature-safe THC gummies sold at the dispensary? Emulsification is the key element. To get the proper gummy-like texture the cannabis concentrate must be combined with another ingredient added to the candy mixture while it’s being cooked – In our case, lecithin (either soy lecithin or sunflower lecithin).

Without this emulsification agent added in the gummy snacks you’re going to make will likely be closer to a jello snack and require from refrigeration; great if you’re looking for the marijuana version of a jello shot, not so much if you want a portable gummy snack.

By the way: We’ll be using the generic term “gummy bears” a lot through-out this article but whatever molds you have and want to use will work just fine – Gummy worms, gummy gems, gummy whatevers. There’s a wide world of gummies outside the bear and we encourage you to explore it!

Now, to make any THC edible you need to start with the basics, meaning a good concentrate. We’re going to outline a classic solution: Steeping your marijuana to make cannabis infused coconut oil.

Making an Infused Oil

If you already have a hash oil or other form of decarbed concentrate you can skip this step and we’ll meet you again in the next section (if it isn’t decarbed, check out our “How to Decarb Your Weed” article and then meet us back here after). If you’re wanting to start 100% from scratch, though, and have nothing but some marijuana buds hanging around, you’ll need to know how to make an extract.

Most common for weed gummy recipes found on the internet is infusing your cannabis into coconut oil – Infused coconut oil works well because it maintains a solid form at room temperature, lending to the solidity of your gummy candy. If you’re not a fan of the flavor of coconut oil other oils can and will work, but for the purposes of our article we’ll be focusing on the cannabis infused coconut oil that is most common and popular.

Cannabis Coconut Oil

Making infused coconut oil is a fairly simple process, but starts off with the proper decarboxylation of your marijuana. Without being decarbed first your cannabis will not be activated and ready for making edibles, ultimately wasting the weed you’ll be using in your cannabis infused coconut oil. We talk about this at length in our decarbing article mentioned above so if you’re unfamiliar with the term or just need a refresher, head there first before moving on to the next step.

Once your cannabis has been decarbed it’s time to begin the infusion. You’ll need the following:

  • A double boiler
  • Cheese cloth & butcher’s twine
  • 1 cup ground, decarbed marijuana
  • 1 cup coconut oil

For those unfamiliar, a double boiler is a method of cooking that allows for indirect heat – Water is placed into one pot, which is then placed on the stove, and a second pot is placed on top of the now-hot water. Dedicated double boilers can be bought but the function is easily replicated at home using a regular pot and a heat-proof bowl (such as Pyrex).

Fill the bottom of your double boiler with water and set it onto your stove at medium-low heat. Make a sachet by placing your cannabis into the cheesecloth and tie securely with twine, placing both the coconut oil and sachet in the top section of your double boiler. Alternatively, you can just put the cannabis straight into the oil and then strain it with cheesecloth (visualized below). We recommend letting your cannabis sachet steep in the oil for a good six to eight hours to extract as much of the THC and cannabinoids as possible.

After your steep, remove the sachet and voilà, you are done. At this point you can squeeze your sachet out if you’d like to wring away as much oil as possible but be aware that doing so will leech out additional chlorophyll and flavonoids into your infusion, giving the end gummy mixture a green color and taste you may not want.

Now that you have your infused coconut oil it’s time to turn it into your cannabis infused gummy bears, and for that we have a couple of different recipes. Let’s take one last detour first, though, and talk about our emulsification agent, what it is, and a bit more on why it’s so important.

We’ve got pictures and more details in our full How to Make Cannabis Coconut Oilrecipe, so check that out if you need more help!

Do You Need to Add Lecithin to Your Gummies?

In short, yes. Lecithin (an extract product itself, made from oils and other fatty substances) is what helps bind your cannabis infused coconut oil and gelatin mixture together when making gummies, and is the most integral part in making sure your gummies won’t weep out any THC concentrate.

Sold in either a powder or a liquid form lecithin can be made from a variety of ingredients – Most common are soy lecithin and sunflower lecithin, made from soy and sunflower oils respectively. For candy making liquid lecithins are often preferred as they’re easier to distribute through-out your liquid mixture.

Soy lecithin and its relatives are easy to find these days,  either online, at a health food store, or at your local big box retailer (check in the cooking oil section), but know that lecithin can be made from many different sources, including animal byproducts; while this recipe isn’t designed to be vegan (we’ll talk more about that later) it’s always good to know where your ingredients are coming from.

Now that we’ve gotten the basics out of the way let’s go over some recipe details. We’re going to do this in two parts: First we have a simple, easy, no frills recipe, and then we’ll go over some additional steps & ingredients that can help you tweak these cannabis gummy bears to the taste and texture you prefer.

Our Simple Weed Gummies Recipe

This recipe is fairly standard and includes a pre-flavored packaged gelatin (again, think Jell-O) along with additional unflavored gelatin to help the gummy bears set. Here’s the tools and ingredients you’ll need to get started:

Tools:

  • Saucepan
  • Whisk
  • Spatula
  • Candy Molds: Flexible silicone molds are needed for easy removal of the gummies. The “block” style ones are great since you can easily dose them into sections.
  • Pouring Device: A kitchen syringe, measuring cup with spout, or sturdy zip-top sandwich bag
  • Non-Stick Cooking Spray

Ingredients:

  • Pre-Packaged Gelatin Dessert (IE: Jell-O): One 3oz package, flavor of your choice
  • Unflavored Gelatin: Either 2.5 tablespoons of gelatin powder or 7.5 gelatin sheets; we recommend buying high-quality gelatin for extra firmness
  • Water: 1/2 cup, cold
  • Corn Syrup: 1/4th cup
  • Cannabis Infused Coconut Oil: 1/4th cup
  • Sunflower/Soy Lecithin: 2 teaspoons

Can I Make Vegan Gummies?

Making vegan weed gummy bears isn’t particularly easy, but can be accomplished by replacing your gelatin with agar agar at a 1:1 ratio (you may need to play around with this blend depending on the strength of your agar powder). Agar agar (or “kanten”) is an algae-based product that is available either online or at any health store; much like gelatin it must be bloomed before use and boiled with your other ingredients.

Also consider replacing at least part of your water with a non-citrus fruit juice, such as apple, or mashed/pureed fruit such as strawberries or blueberries – The additional pectin will help ensure your end gummies set firm (and taste good to boot). This is similar to traditional recipes for pâte de fruit, which also works very well for making cannabis gummies.

This Post Has One Comment

  1. Alison Gardner

    You gotta try quick method. Melt down some fruit gummies because they are softer and cure easily. Sometimes I add my favorite Lifesavers to the batch to kick up flavor a bit. Add ingredients with licithin freeze for 20 mins in silicone shape of choice. And done, potent and full of flavor. Decorate with a cute bag and done.

Leave a Reply